From: Mario Höllein <mhoellein@freenet.de>
Date: Fri, 5 Jun 2020 10:40:06 +0000 (+0200)
Subject: Nutenstein für M5 oder M6 Mutter
X-Git-Url: https://git.hoellein.online/?a=commitdiff_plain;h=38e1d9f3360449e37bec74f9f8baf63a65d081c0;p=openscad

Nutenstein für M5 oder M6 Mutter
---

diff --git a/Nutsteine/T-Nutenstein_hoch_Mx.scad b/Nutsteine/T-Nutenstein_hoch_Mx.scad
new file mode 100644
index 0000000..8671701
--- /dev/null
+++ b/Nutsteine/T-Nutenstein_hoch_Mx.scad
@@ -0,0 +1,26 @@
+//M5 - 5, M6 - 6
+Mx=6;             
+difference(){
+    corpus();                                                              
+    if (Mx==5){
+        translate([0,0,-20])cylinder(d=4.9,h=50,$fn=50);                        //Bohrung fuer M5-Schraube
+        translate([0,0,-5.3])rotate([0,0,30])cylinder(d=9.2,h=3.4,$fn=6);       //Sechskant Loch fuer M5-Mutter   
+    }
+    else{
+        translate([0,0,-20])cylinder(d=5.6,h=50,$fn=50);                       //Bohrung fuer M&-Schraube
+        translate([0,0,-5.6])rotate([0,0,30])cylinder(d=11.8,h=5,$fn=6);       //Sechskant Loch fuer M6-Mutter        
+    }
+        
+}
+//T-Nutenschuh 16.6mm lang, ohne Bohrung
+module corpus(){
+    //obere Fuehrung
+    translate([0,0,(4-1.7)/2])cube([8,16.6,4],center=true);
+    //Klemmflaeche
+    translate([0,0,-1.7])cube([16,16.6,2],center=true);
+    //Profil unten
+    translate([0,0,-2.7]) hull(){
+        cube([16,16.6,0.01],center=true);
+        translate([0,0,-2.5])cube([11,16.6,0.01],center=true);
+    }
+}
\ No newline at end of file