+++ /dev/null
-#!/bin/sh -e
-#
-# smartmontools init.d startup script
-#
-# (C) 2003,04,07 Guido Günther <agx@sigxcpu.org>
-#
-# loosely based on the init script that comes with smartmontools which is
-# copyrighted 2002 by Bruce Allen <smartmontools-support@lists.sourceforge.net>
-#
-### BEGIN INIT INFO
-# Provides: smartmontools
-# Required-Start: $syslog $remote_fs
-# Required-Stop: $syslog $remote_fs
-# Default-Start: 2 3 4 5
-# Default-Stop: 1
-# Short-Description: SMART monitoring daemon
-### END INIT INFO
-
-SMARTCTL=/usr/sbin/smartctl
-DAEMON=/usr/sbin/smartd
-PIDFILE=/var/run/smartd.pid
-[ -x $SMARTCTL ] || exit 0
-[ -x $DAEMON ] || exit 0
-. /lib/lsb/init-functions
-
-RET=0
-
-[ -r /etc/default/rcS ] && . /etc/default/rcS
-[ -r /etc/default/smartmontools ] && . /etc/default/smartmontools
-
-smartd_opts="--pidfile $PIDFILE $smartd_opts"
-
-enable_smart() {
- log_action_begin_msg "Enabling S.M.A.R.T."
- for device in $enable_smart; do
- log_action_cont_msg "$device"
- if ! $SMARTCTL --quietmode=errorsonly --smart=on $device; then
- log_action_cont_msg "(failed)"
- RET=2
- fi
- done
- log_action_end_msg 0
-}
-
-check_start_smartd_option() {
- if [ ! "$start_smartd" = "yes" ]; then
- [ "$VERBOSE" = "yes" ] && log_warning_msg "Not starting S.M.A.R.T. daemon smartd, disabled via /etc/default/smartmontools"
- return 1
- else
- return 0
- fi
-}
-
-running_pid()
-{
- # Check if a given process pid's cmdline matches a given name
- pid=$1
- name=$2
- [ -z "$pid" ] && return 1
- [ ! -d /proc/$pid ] && return 1
- cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
- # Is this the expected child?
- [ "$cmd" != "$name" ] && return 1
- return 0
-}
-
-running()
-{
-# Check if the process is running looking at /proc
-# (works for all users)
- # No pidfile, probably no daemon present
- [ ! -f "$PIDFILE" ] && return 1
- # Obtain the pid and check it against the binary name
- pid=`cat $PIDFILE`
- running_pid $pid $DAEMON || return 1
- return 0
-}
-
-case "$1" in
- start)
- [ -n "$enable_smart" ] && enable_smart
- if check_start_smartd_option; then
-
- log_daemon_msg "Starting S.M.A.R.T. daemon" "smartd"
- if running; then
- log_progress_msg "already running"
- log_end_msg 0
- exit 0
- fi
- rm -f $PIDFILE
- if start-stop-daemon --start --quiet --pidfile $PIDFILE \
- --exec $DAEMON -- $smartd_opts; then
- log_end_msg 0
- else
- log_end_msg 1
- RET=1
- fi
- fi
- ;;
- stop)
- log_daemon_msg "Stopping S.M.A.R.T. daemon" "smartd"
- start-stop-daemon --stop --quiet --oknodo --pidfile $PIDFILE
- log_end_msg 0
- ;;
- reload|force-reload)
- log_daemon_msg "Reloading S.M.A.R.T. daemon" "smartd"
- if start-stop-daemon --stop --quiet --signal 1 \
- --pidfile $PIDFILE; then
- log_end_msg 0
- else
- log_end_msg 1
- RET=1
- fi
- ;;
- restart)
- if check_start_smartd_option; then
- log_daemon_msg "Restarting S.M.A.R.T. daemon" "smartd"
- start-stop-daemon --stop --quiet --oknodo --retry 30 --pidfile $PIDFILE
- rm -f $PIDFILE
- if start-stop-daemon --start --quiet --pidfile $PIDFILE \
- --exec $DAEMON -- $smartd_opts; then
- log_end_msg 0
- else
- log_end_msg 1
- RET=1
- fi
- fi
- ;;
- status)
- status_of_proc $DAEMON smartd && exit 0 || exit $?
- ;;
- *)
- echo "Usage: /etc/init.d/smartmontools {start|stop|restart|reload|force-reload|status}"
- exit 1
-esac
-
-exit $RET
+++ /dev/null
-# Sample configuration file for smartd. See man smartd.conf.
-
-# Home page is: http://www.smartmontools.org
-
-# smartd will re-read the configuration file if it receives a HUP
-# signal
-
-# The file gives a list of devices to monitor using smartd, with one
-# device per line. Text after a hash (#) is ignored, and you may use
-# spaces and tabs for white space. You may use '\' to continue lines.
-
-# You can usually identify which hard disks are on your system by
-# looking in /proc/ide and in /proc/scsi.
-
-# The word DEVICESCAN will cause any remaining lines in this
-# configuration file to be ignored: it tells smartd to scan for all
-# ATA and SCSI devices. DEVICESCAN may be followed by any of the
-# Directives listed below, which will be applied to all devices that
-# are found. Most users should comment out DEVICESCAN and explicitly
-# list the devices that they wish to monitor.
-DEVICESCAN -d removable -n standby -m root -M exec /usr/share/smartmontools/smartd-runner
-
-# Alternative setting to ignore temperature and power-on hours reports
-# in syslog.
-#DEVICESCAN -I 194 -I 231 -I 9
-
-# Alternative setting to report more useful raw temperature in syslog.
-#DEVICESCAN -R 194 -R 231 -I 9
-
-# Alternative setting to report raw temperature changes >= 5 Celsius
-# and min/max temperatures.
-#DEVICESCAN -I 194 -I 231 -I 9 -W 5
-
-# First ATA/SATA or SCSI/SAS disk. Monitor all attributes, enable
-# automatic online data collection, automatic Attribute autosave, and
-# start a short self-test every day between 2-3am, and a long self test
-# Saturdays between 3-4am.
-#/dev/sda -a -o on -S on -s (S/../.././02|L/../../6/03)
-
-# Monitor SMART status, ATA Error Log, Self-test log, and track
-# changes in all attributes except for attribute 194
-#/dev/sdb -H -l error -l selftest -t -I 194
-
-# Monitor all attributes except normalized Temperature (usually 194),
-# but track Temperature changes >= 4 Celsius, report Temperatures
-# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
-# Send mail on SMART failures or when Temperature is >= 55 Celsius.
-#/dev/sdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
-
-# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
-# ATA Translation (SAT) layer is between the OS and the device then
-# this can be flagged with the '-d sat' option. This situation may
-# become common with SATA disks in SAS and FC environments.
-# /dev/sda -a -d sat
-
-# A very silent check. Only report SMART health status if it fails
-# But send an email in this case
-#/dev/sdc -H -C 0 -U 0 -m admin@example.com
-
-# First two SCSI disks. This will monitor everything that smartd can
-# monitor. Start extended self-tests Wednesdays between 6-7pm and
-# Sundays between 1-2 am
-#/dev/sda -d scsi -s L/../../3/18
-#/dev/sdb -d scsi -s L/../../7/01
-
-# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
-# the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4,
-# and 4-5 am.
-# NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
-# is DEPRECATED. Use the /dev/tweN character device interface instead.
-# For example /dev/twe0, /dev/twe1, and so on.
-#/dev/sdc -d 3ware,0 -a -s L/../../7/01
-#/dev/sdc -d 3ware,1 -a -s L/../../7/02
-#/dev/sdc -d 3ware,2 -a -s L/../../7/03
-#/dev/sdc -d 3ware,3 -a -s L/../../7/04
-
-# Monitor 2 ATA disks connected to a 3ware 9000 controller which
-# uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
-# between 1-2 and 3-4 am.
-#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
-#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
-
-# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
-# uses the 3w-sas driver (Linux). Start long self-tests Tuesdays
-# between 1-2 and 3-4 am.
-# On FreeBSD /dev/tws0 should be used instead
-#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
-#/dev/twl0 -d 3ware,1 -a -s L/../../2/03
-
-# Same as above for Windows. Option '-d 3ware,N' is not necessary,
-# disk (port) number is specified in device name.
-# NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
-#/dev/hdc,0 -a -s L/../../2/01
-#/dev/hdc,1 -a -s L/../../2/03
-#
-# Monitor 2 disks connected to the first HP SmartArray controller which
-# uses the cciss driver. Start long tests on Sunday nights and short
-# self-tests every night and send errors to root
-#/dev/cciss/c0d0 -d cciss,0 -a -s (L/../../7/02|S/../.././02) -m root
-#/dev/cciss/c0d0 -d cciss,1 -a -s (L/../../7/03|S/../.././03) -m root
-
-# Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
-# self-tests Sundays between 1-2, 2-3, and 3-4 am.
-#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
-#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
-#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
-
-# Monitor 2 ATA disks connected to the same PMPort which connected to the
-# HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
-#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
-#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
-
-# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
-# PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
-#
-# -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
-# -T TYPE set the tolerance to one of: normal, permissive
-# -o VAL Enable/disable automatic offline tests (on/off)
-# -S VAL Enable/disable attribute autosave (on/off)
-# -n MODE No check. MODE is one of: never, sleep, standby, idle
-# -H Monitor SMART Health Status, report if failed
-# -l TYPE Monitor SMART log. Type is one of: error, selftest
-# -f Monitor for failure of any 'Usage' Attributes
-# -m ADD Send warning email to ADD for -H, -l error, -l selftest, and -f
-# -M TYPE Modify email warning behavior (see man page)
-# -s REGE Start self-test when type/date matches regular expression (see man page)
-# -p Report changes in 'Prefailure' Normalized Attributes
-# -u Report changes in 'Usage' Normalized Attributes
-# -t Equivalent to -p and -u Directives
-# -r ID Also report Raw values of Attribute ID with -p, -u or -t
-# -R ID Track changes in Attribute ID Raw value with -p, -u or -t
-# -i ID Ignore Attribute ID for -f Directive
-# -I ID Ignore Attribute ID for -p, -u or -t Directive
-# -C ID Report if Current Pending Sector count non-zero
-# -U ID Report if Offline Uncorrectable count non-zero
-# -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
-# -v N,ST Modifies labeling of Attribute N (see man page)
-# -a Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
-# -F TYPE Use firmware bug workaround. Type is one of: none, samsung
-# -P TYPE Drive-specific presets: use, ignore, show, showall
-# # Comment: text after a hash sign is ignored
-# \ Line continuation character
-# Attribute ID is a decimal integer 1 <= ID <= 255
-# except for -C and -U, where ID = 0 turns them off.
-# All but -d, -m and -M Directives are only implemented for ATA devices
-#
-# If the test string DEVICESCAN is the first uncommented text
-# then smartd will scan for devices.
-# DEVICESCAN may be followed by any desired Directives.
projects / zenbook / commitdiff